You can rest assured to buy DC 24V Tower Photothermal Solar Linear Actuator from our factory.This indicates that the actuator is powered by a direct current (DC) voltage of 24 volts. This voltage level is common in many solar power systems and is often used to power various components, including actuators.
Protection level
Temperature
Salt spray
Tower photothermal
Higher safety factor
More stable performance
More cost-effective
Intelligent equipment
| Voltage(V) | 24DC | Front-End Connector | ф25 |
| No-Load Speed(mm/s) | 1.65±10% | Rear-End Connector | ф25 |
| Rated Load Speed(mm/s) | 1.3±10% | Motor Wire | 14AWG*3C+20AWG*5C |
| Stroke(mm) | 993.5土2 | Main Body Color | Black+Silver |
| Installation Distance(mm) | 335土1 | Signal Type | Dual Hall Signal |
| Rated Load(N) | 32000 | Limiting Method | Built-In Limit Switch |
| Maximum Load(N) | 46000 | IP Code | IP65 |
| Full Stroke Static Load(N) | 46000 | Operating Temperature(℃C) | -30C-+65℃ |
| Half Stroke Static Load(N) | 55100 | Maximum Altitude(m) | 3500 |
| aximum Half Stroke Static Load(N | 74000 | Operating Relative Humidity | <90% |
| Rated Cutting Current(V) | ≤7.5 | Anti-Corrosion Rating | C3-15Years(IS012944-2) |
